Citation, commencement and extent _I1

1. —(1) These Regulations may be cited as the Energy Performance of Buildings (England and Wales) (Amendment) Regulations 2015 and come into force on 6th April 2015.

(2) These Regulations extend to England and Wales only.

Amendment of the Energy Performance of Buildings (England and Wales) Regulations 2012_I2

2. —(1)The Energy Performance of Buildings (England and Wales) Regulations 2012( 4 ) are amended as follows.

(2) In regulation 11 (2) (statement of energy performance indicator)—

(a) after “9th January 2013, the” insert “relevant person, or, where applicable, a person acting on behalf of the relevant person, must ensure that the”; and

(b) for “must be” substitute “is”.

(3) In regulation 18 (inspections of air-conditioning systems)—

(a) in paragraph (1) for “the system is” substitute “accessible parts of the system are”; and

(b) in paragraph (2) after “The first inspection of the” insert “accessible parts of the”.

(4) In regulation 19 (reports)—

(a) in paragraph (1) after “system” insert “under regulation 18”; and

(b) in paragraph (2) for “possible improvements to” substitute “cost-effective improvement to the energy performance of”.

(5) In regulation 28 (fees for entering data onto register)—

(a) in paragraph (a) for “£1.30”, substitute “£1.27”; and

(b) in paragraph (b) for “£9.73”, substitute “£11.66”.

(6) In regulation 33 (fee for disclosure of bulk access data)—

(a) in paragraph (1)(a)—

(i) for “small” substitute “regular”; and

(ii) for “one penny (1p)” substitute “two pence (2p)”.

(b) omit paragraph (1)(b);

(c) in paragraph (1)(c) for “ten pence (10p)” substitute “four pence (4p)”; and

(d) in paragraph (2)—

(i) for “small” substitute “regular”; and

(ii) omit “, “medium data pack””.

(7) In Schedule 2 (meanings of small, medium and large data packs)—

(a) in the title for “small, medium” substitute “regular”;

(b) in Part 1 (energy performance certificates)—

(i) for sub-paragraphs (a), (b) and (c) of paragraph 2 substitute—

“ (a) a regular data pack means a set of data containing the following information concerning the property in question—

(i) the address (including the postcode),

(ii) the energy rating,

(iii) the potential energy rating,

(iv) the energy efficiency,

(v) the potential energy efficiency,

(vi) the property type,

(vii) the inspection date,

(viii) the local authority area,

(ix) the constituency and county where it is located,

(x) the date the data were entered onto the register,

(xi) the transaction type,

(xii) the current environment impact,

(xiii) the potential environment impact,

(xiv) the current energy consumption,

(xv) the potential energy consumption,

(xvi) the current CO2 emissions,

(xvii) the current CO2 emissions per floor area,

(xviii) the potential CO2 emissions,

(xix) the current lighting cost,

(xx) the potential lighting cost,

(xxi) the current heating cost,

(xxii) the potential heating cost,

(xxiii) the current hot water cost,

(xxiv) the potential hot water cost,

(xxv) the total floor area,

(xxvi) the energy tariff,

(xxvii) whether the property is connected to the gas network,

(xxviii) the floor level,

(xxix) whether the property is on the top floor (for flats),

(xxx) if the property is a flat not on the top floor the storey count for the property,

(xxxi) the overall dimensions and size of the building,

(xxxii) the type of heating controls,

(xxiii) the proportion of windows which are multi-glazed,

(xxiv) the types of glazing and the area glazed,

(xxxv) the number of extensions to the property,

(xxxvi) the number of habitable rooms,

(xxxvii) the number of heated rooms,

(xxxviii) the proportion of low energy light, and

(xxxix) the number of open fireplaces; and

(b) a large data pack means a set of data containing the data described in paragraph 2(a), together with any additional data entered onto the register pursuant to regulation 27 from which an energy performance certificate (or any information contained within such a certificate) may be produced in relation to the property. ” ; and

(ii) for sub-paragraphs (a), (b) and (c) of paragraph 3 substitute—

“ (a) a regular data pack means a set of data containing the following information concerning the property in question—

(i) the address (including the postcode),

(ii) the energy rating,

(iii) the property type,

(iv) the inspection date,

(v) the local authority area,

(vi) the constituency and county where it is located,

(vii) the date the data were entered onto the register,

(viii) the transaction type,

(ix) the benchmark against other new build or existing properties as appropriate,

(x) whether the property is a level 3, 4 or 5 building,

(xi) the main heating fuel,

(xii) the other fuel description,

(xiii) whether the property is air-conditioned,

(xiv) whether the property has specialised energy requirements,

(xv) the energy from renewable sources (if any) used by the property,

(xvi) the floor area, and

(xvii) the current CO2 emissions per floor area; and

(b) a large data pack means a set of data containing the data described in paragraph 3(a), together with any additional data entered onto the register pursuant to regulation 27 from which an energy performance certificate (or any information contained within such a certificate) may be produced in relation to the property. ” ;

(c) in Part 2 (display energy certificates) for sub-paragraphs (a), (b) and (c) of paragraph 4 substitute—

“ (a) a regular data pack means a set of data containing the following information concerning the property in question—

(i) the address (including the postcode),

(ii) the energy rating,

(iii) the proportion of CO2 emissions attributable to electricity used in the property,

(iv) the proportion of CO2 emissions from energy used to heat the property,

(v) the proportion of CO2 emissions from energy from renewable sources (if any) used in the property,

(vi) the property type,

(vii) the inspection date,

(viii) the local authority area,

(ix) the constituency and county where it is located,

(x) the date the data were entered onto the register,

(xi) the benchmark against other new build or existing properties as appropriate,

(xii) whether the property is a level 3, 4 or 5 building,

(xiii) the main heating fuel,

(xiv) the other fuel description,

(xv) whether the building is air-conditioned,

(xvi) whether the building has specialised energy requirements,

(xvii) the energy from renewable sources (if any) used in the property,

(xviii) the floor area, and

(xix) the building level; and

(b) a large data pack means a set of data containing the data described in paragraph 4(a) together with any additional data entered onto the register pursuant to regulation 27 from which a display energy certificate (or any information contained within such a certificate) may be produced in relation to the property in question. ” ; and

(d) in Part 3 (air-conditioning inspection reports) for sub-paragraphs (a), (b) and (c) of paragraph 5 substitute—

“ (a) a regular data pack means a set of data containing the following information concerning the property in question—

(i) the address (including the postcode),

(ii) the property type,

(iii) the inspection date,

(iv) the local authority area,

(v) the constituency and county where it is located,

(vi) the date the data were entered onto the register; and

(b) a large data pack means a set of data containing the data described in paragraph 5(a) together with any additional data entered onto the register pursuant to regulation 27 from which a inspection report (or any information contained within such a certificate) may be produced in relation to the property in question. ” .