🔆 📖 👤

Statutory Instruments

2020 No. 852

Exiting The European Union

Consumer Protection

Electromagnetic Compatibility

Environmental Protection

Health And Safety

Telecommunications

Weights And Measures

The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020

Sift requirements satisfied

16th July 2020

Made

11th August 2020

Laid before Parliament

12th August 2020

Coming into force in accordance with regulation 2

The Secretary of State in exercise of the powers conferred by section 8(1) of, and paragraph 21 of Schedule 7 to, the European Union (Withdrawal) Act 2018 , makes the following Regulations.

The requirements of paragraph 3(2) of Schedule 7 to the European Union (Withdrawal) Act 2018 (relating to the appropriate Parliamentary procedure for these regulations) have been satisfied.

Citation

1. These Regulations may be cited as the Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020.

Commencement

2. —(1) This regulation, and regulations 1, 3 and 5 come into force immediately before the coming into force of regulations 10 and 16 of the Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 .

(2) Regulation 4 comes into force immediately before IP completion day.

Extent

3. Any amendment made by these Regulations has the same extent as the provision amended.

Amendment to the Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019

4. —(1)The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 are amended as follows.

(2) In the provisions listed in Schedule 1, for “exit day” substitute “ IP completion day ” .

(3) In Schedule 26 (non-automatic weighing instruments), in paragraph 2—

(a) in sub-paragraph (h) omit the words from “in the definition” to “Schedule 6”;

(b) after sub-paragraph (h) insert—

(ha) in the definition of “essential requirements” for “Annex I to the Directive” substitute “ Schedule 6 ” ; .

Amendment to the Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019

5. In the provisions of the Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 listed in Schedule 2, for “exit day” substitute “ IP completion day ” .

Paul Scully

Parliamentary Under Secretary of State

Department for Business, Energy and Industrial Strategy

Regulation 4

SCHEDULE 1 Amendment to the Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019

1. The provisions referred to in regulation 4(2) are as follows—

(a) in Schedule 5 (measuring instruments EEC requirements) in paragraph 1(6), in the inserted regulation 15A(1);

(b) in Schedule 8 (noise emission) in paragraphs—

(i) 2(a)(i);

(ii) 8, in the substituted regulation 13 (four times);

(iii) 14, in the inserted regulation 23 (five times);

(c) in Schedule 11 (packaged goods) in paragraph 3(b), in the inserted paragraph (7)(a);

(d) in Schedule 12 (supply of machinery) in paragraphs—

(i) 2(2);

(ii) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(iii) 16, in the inserted regulation 16A (four times);

(iv) 16, in the inserted regulation 16B(6) (twice);

(v) 16, in the inserted regulation 16C(1)(b)(ii) (twice);

(vi) 22, in the inserted regulation 30 (five times);

(vii) 22, in the inserted regulation 31(2)(b);

(e) in Schedule 15 (toys) in paragraphs—

(i) 3, in the inserted regulation 2A (six times);

(ii) 4(a);

(iii) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(iv) 5, in the inserted regulation 3B(3);

(v) 23, in the substituted paragraph (2)(a)(iii);

(vi) 27, in the inserted regulation 39E(3);

(vii) 28, in the substituted regulation 40A (four times);

(viii) 28, in the substituted regulation 40D(b)(ii);

(f) in Schedule 16 (explosives) in paragraphs—

(i) 2(2)(i);

(ii) 4(7), in the inserted paragraph (10) (twice);

(iii) 28, in the substituted regulation 69 (three times);

(iv) 28, in the substituted regulation 72(b)(ii) (twice);

(v) 29, in the inserted regulation 82A (five times);

(g) in Schedule 17 (weights and measures revocations) in paragraphs—

(i) 1(2), in the inserted paragraph (2);

(ii) 1(3)(c), in the inserted paragraph (5);

(h) in Schedule 19 (pyrotechnic articles) in paragraphs—

(i) 2(2)(g);

(ii) 12(b), in the substituted paragraph (3)(a)(ii);

(iii) 27, in the substituted regulation 43 (four times);

(iv) 27, in the substituted regulation 46(b)(ii) (twice);

(v) 36, in the inserted regulation 74A (five times);

(vi) 43(7)(a);

(vii) 43(8), in the inserted paragraph 6A(1);

(i) in Schedule 20 (electromagnetic compatibility) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 2(2)(h);

(iii) 14(b), in the inserted paragraph (1A)(a)(ii);

(iv) 28, in the substituted regulation 43 (four times);

(v) 28, in the substituted regulation 46(b)(ii) (twice);

(vi) 33, in the inserted regulation 74 (five times);

(j) in Schedule 21 (simple pressure vessels) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 2(2)(h);

(iii) 15(b), in the inserted paragraph (1A)(a)(ii);

(iv) 30, in the substituted regulation 45 (four times);

(v) 30, in the substituted regulation 48(b)(ii) (twice);

(vi) 37, in the inserted regulation 76A (five times);

(k) In Schedule 22 (lifts) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 2(2)(i);

(iii) 18(b), in the substituted paragraph (3)(a)(ii);

(iv) 31, in the substituted regulation 51(four times);

(v) 31, in the substituted regulation 54(b)(ii) (twice);

(vi) 37, in inserted paragraph (3);

(vii) 37, in inserted paragraph (4) (twice);

(viii) 37, in inserted paragraph (6) (twice);

(l) in Schedule 23 (electrical equipment) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 2(2)(d);

(iii) 11(b), in the substituted paragraph (3)(a)(ii);

(iv) 30, in the inserted regulation 62A (three times);

(m) in Schedule 24 (pressure equipment) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 2(2)(h);

(iii) 15(b), in the substituted paragraph (3)(a)(ii);

(iv) 35, in the substituted regulation 51 (four times);

(v) 35, in the substituted regulation 52 (four times);

(vi) 35, in the substituted regulation 53 (four times);

(vii) 35, in the substituted regulation 59 (twice);

(viii) 41, in the inserted regulation 88A (six times);

(ix) 46(b), in the substituted heading of Part 1 of Schedule 3;

(x) 46(c), in the heading of the inserted Part 2 of Schedule 3;

(n) in Schedule 25 (equipment etc. for use in potentially explosive atmospheres) in paragraphs—

(i) 2(2)(a);

(ii) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(iii) 14(b), in the substituted paragraph (3)(a)(ii);

(iv) 27, in the substituted regulation 42 (four times);

(v) 27, in the substituted regulation 45(b)(ii) (twice);

(vi) 34, in the inserted regulation 72A (five times);

(o) in Schedule 26 (non-automatic weighing instruments) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 2(2)(h);

(iii) 5, in the inserted regulation 4A (five times);

(iv) 15(a), in the substituted paragraph (2)(a)(ii);

(v) 32, in the substituted regulation 47 (four times);

(vi) 32, in the substituted regulation 50(b)(ii) (twice);

(p) in Schedule 27 (Amendment of the Measuring Instruments Regulations 2016) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 14(a), in the substituted paragraph (2)(a)(ii);

(iii) 38, in the substituted regulation 53 (four times);

(iv) 38, in the substituted regulation 56(b)(ii) (twice);

(v) 50(a), in the inserted paragraph 2A of Schedule 3 (five times);

(q) in Schedule 28 (recreational craft), in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 2(2)(j);

(iii) 12, in the substituted paragraph (2)(a)(ii);

(iv) 36, in the substituted regulation 55 (four times);

(v) 36, in the substituted regulation 58(b)(ii) (twice);

(vi) 41, in the inserted regulation 89A (seven times);

(r) in Schedule 29 (radio equipment), Part 1, in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 12(c);

(iii) 19(b), in the substituted paragraph (3)(a)(ii);

(iv) 36, in the substituted regulation 46 (four times);

(v) 36, in the substituted regulation 49(b)(ii) (twice);

(vi) 44, in the inserted regulation 76A (five times);

(s) in Schedule 33 (Regulation (EC) No 765/2008 ) in paragraphs—

(i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(ii) 5, in the substituted Article 4(2);

(iii) 11, in the substituted Article 10(5);

(t) in Schedule 34 (cosmetics) in paragraphs—

(i) 3(d), in the substituted point (h);

(ii) 3(h), in the inserted point (u);

(iii) 3(h), in the inserted point (za);

(iv) 13, in the substituted Article 13(3);

(v) 16, in the substituted Article 16 (three times);

(vi) 18, in the inserted point (ab);

(vii) 32, in the inserted regulation 3A (three times);

(u) in Schedule 35 (personal protective equipment), in paragraphs—

(i) 1(2)(a) in the inserted definition of “Regulation 2016/425 (pre-exit)”;

(ii) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(iii) 3(4)(e), in the inserted point (24);

(iv) 3(10)(b)(iii), in subparagraph (a)(ii) of the inserted unnumbered paragraph;

(v) 3(19), in the substituted Article 20 (twice);

(vi) 3(42) in the substituted Article 47 (twice);

(v) in Schedule 36 (gas appliances), in paragraphs—

(i) 1(2)(a), in the inserted definition of “Regulation 2016/426 (pre-exit)”;

(ii) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(iii) 2(3)(e), in the inserted point (37);

(iv) 2(10)(b)(ii), in subparagraph (a)(ii) of the inserted unnumbered paragraph;

(v) 2(19), in the substituted Article 19 (twice);

(vi) 2(41), in the substituted Article 44 (twice).

Regulation 5

SCHEDULE 2 Amendment of the Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019

1. The provisions referred to in regulation 5 are as follows—

(a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(b) in regulation 16(b) in the inserted paragraph 3 (twice).

Status: There are currently no known outstanding effects for the The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020.
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (2020/852)

Displaying information

Status of this instrument

footnotecommentarytransitional and savingsin force statusrelated provisionsgeo extentinsert/omitsource countin force adj
F1Words in reg. 2(1) substituted (31.12.2020 immediately before S.I. 2020/852 comes into force) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(2)(a)substituted
F2Word in reg. 2(1) inserted (31.12.2020 immediately before S.I. 2020/852 comes into force) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(2)(b)inserted
F3Sch. 1 para. 1(d)(ii) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(a)omitted
F4Sch. 1 para. 1(e)(iii) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(b)omitted
F5Sch. 1 para. 1(i)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(c)omitted
F6Sch. 1 para. 1(j)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(d)omitted
F7Sch. 1 para. 1(k)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(e)omitted
F8Sch. 1 para. 1(l)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(f)omitted
F9Sch. 1 para. 1(m)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(g)omitted
F10Sch. 1 para. 1(n)(ii) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(h)omitted
F11Sch. 1 para. 1(o)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(i)omitted
F12Sch. 1 para. 1(p)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(j)omitted
F13Sch. 1 para. 1(q)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(k)omitted
F14Sch. 1 para. 1(r)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(l)omitted
F15Sch. 1 para. 1(s)(i) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(m)omitted
F16Sch. 1 para. 1(u)(ii) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(n)omitted
F17Sch. 1 para. 1(v)(ii) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(3)(o)omitted
F18Sch. 2 para. 1(a) omitted (31.12.2020 immediately before S.I. 2020/852 comes into force) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460) , reg. 1(3) , Sch. 4 para. 1(4)omitted
I1Reg. 1 in force at 31.12.2020 immediately before S.I. 2019/1246 , regs. 10 , 16 come into force, see reg. 2(1)
I2Reg. 2 in force at 31.12.2020 immediately before S.I. 2019/1246 , regs. 10 , 16 come into force, see reg. 2(1)
I3Reg. 3 in force at 31.12.2020 immediately before S.I. 2019/1246 , regs. 10 , 16 come into force, see reg. 2(1)
I4Reg. 4 in force at 31.12.2020 immediately before IP completion day, see reg. 2(2)
I5Reg. 5 in force at 31.12.2020 immediately before S.I. 2019/1246 , regs. 10 , 16 come into force, see reg. 2(1) (as amended by S.I. 2020/1460 , reg. 1(3) , Sch. 4 para. 1(2)(a) )
I6Sch. 1 para. 1 in force at 31.12.2020 immediately before IP completion day, see reg. 2(2)
I7Sch. 2 para. 1 in force at 31.12.2020 immediately before S.I. 2019/1246 , regs. 10 , 16 come into force, see reg. 2(1) (as amended by S.I. 2020/1460 , reg. 1(3) , Sch. 4 para. 1(2)(a) )
M12018 c. 16 ; section 8 was amended by section 27 of the European Union (Withdrawal Agreement) Act 2020 (c. 1) and paragraph 21 of Schedule 7 was amended by section 41(4) and Schedule 5, paragraph 53(2) of that Act.
M2S.I. No. 2019/1246.
M3S.I. No. 2019/696
Defined TermSection/ArticleIDScope of Application
Changes that affect Made by
Sort descending by Changed Legislation Sort descending by Year and Number Changed Provision Type of effect Sort descending by Affecting Legislation Title Sort descending by Year and Number Affecting Provision Sort descending by Changes made to website text Note
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 1 coming into force The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2(1) Yes
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2 coming into force The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2(1) Yes
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 3 coming into force The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2(1) Yes
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 4 coming into force The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2(2) Yes
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 5 coming into force The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2(1) Yes
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 Sch. 1 para. 1 coming into force The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2(2) Yes
The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 Sch. 2 para. 1 coming into force The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 2020 No. 852 reg. 2(1) Yes

Status of changes to instrument text

The list includes made instruments, both those in force and those yet to come into force. Typically, instruments that are not yet in force (hence their changes are not incorporated into the text above) are indicated by description 'not yet' in the changes made column.